3.5 Inch TFT Color Display Screen Module 320 X 480 Support UN0 Mega2560 Geekcreit for Arduinno - products that work with official Arduinn0 boards COD

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

• Select
• Make:
• Select
• Submodel:
• Select
• Engine:

This part is compatible with vehicle(s).Show all compatible vehicles 1

• Year
• Make
• Model
• Submodel
• Trim
• Engine

Description:
Support UN0 and Mega2560 and other development board DIP, Without any wiring, all open source,  libraries offer

DC: 5V
Click here
Note:
The control and driving circuit of TFT modules is low voltage and  FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity, therefore, in handling, assembling and use should be extremely careful to prevent static electricity:　1. Using soldering iron or  power FRIDA tools must be well grounded and operation, make them without leakage;2. Do not use hand to touch the leads, circuit board and metal boxes; 3. Do not use a vacuum cleaner for cleaning, because it generates strong static electricity;4. When the air is dry, can also generate static electricity, therefore, workshop humidity  shall be above RH60%;5. If it is necessary to direct contact it , should enable the human body in the same potential with the modules? ormake  human body be well grounded;6. Remove or back in the bags or move locations, also need to be careful to prevent static electricity. Don't replace or discard the original packing. Package included:
1 x 3.5 Inch TFT Color Screen Module 320 X 480 Support UN0 Mega2560